| Filters |
|
High pass: |
0.05Hz cutoff |
|
Low pass: |
150Hz cutoff |
|
Notch filter: |
50Hz, 60Hz (software filter) |
|
Input dynamic range: |
±5 mV |
|
Common mode rejection: |
>100dB |
|
DC offset capability: |
300 mV DC |
|
Input lead impedance: |
>20M ohm at DC |
|
| |
| ECG Monitor |
The ECG signals are displayed in real time on the LCD screen of the portable ECScope 12i.
 The display also shows
ECG lead selection
ECG Gain selection
Heart Rate
ECG strips record option
ECG interpretation
|
| |
| Patient safety |
|
Patient leakage current: <10 uA |
|
Classified as Class II - Type CF device as per IEC requirements |
|
Protected from patient defibrillation |
|
| |
| Physical specifications |
|
Weight: |
<0.4Kgs (including the battery) |
|
Dimensions: |
75 x 95 x 112 (mm) |
|
| |
| Environmental specifications |
|
Operating temperature: |
0°C to 45°C |
|
Storage Temperature: |
–20°C to +65°C
|
|
Humidity: |
10% to 95% |
|
Pressure: |
700 -1060 millibars |
|
| |
| Regulatory compliance |
| IEC 60601-1, IEC 60601-1-1, IEC 60601-1-2, IEC 60601-1-4, IEC60601-2-25 and IEC 60601-2-27 |
| |
| Data storage capability |
|
Dyansys USB memory key (Thumb drives) can be used for data storage/backup |
|
Data can be exported to a PC via a USB memory key |
|
| |
| Printing capability |
|
Works with Dyansys specific printers |
|
Printout includes patient demographics, 12 lead ECG graphs and interpreted data |
|
Prints on A4/letter size papers in color providing an inexpensive printing solution |
|
| |
| Power specifications |
|
AC adapter input: |
100-240V AC, 50/60Hz |
|
AC adapter output: |
12V DC @ 2amps Max |
|
Power Consumption: |
<15W |
|
| |
| Battery and charger |
|
Battery pack type: |
NiMH rechargeable battery |
|
Battery voltage: |
3.6V DC |
|
Battery capacity: |
2500 mAh |
|
Typical battery operational time on full charge (without any peripherals connected): |
>6hours |
|
Typical battery charge time: |
6 hours |
|
| |
| Product Lifetime |
| 5 Years |
| |
| Patient Information |
| Input at the start of the measurement |
| |
| Product Test and Calibration |
| Extended test and calibration can be performed including the ECG cable by connecting the ECG cables to calibration terminals provided in the product |
| |
| Help Facility |
| Is available at any time on the display |
| |
| Data Display |
| Displayed in color touch screen palmtop |
| |
| Standard accessories |
|
10 lead ECG cable |
|
Product user manual |
|
| |
| |
